Home Introduction Scope of Services Contractual Product Specifications Client Contact us / Request a Quote
IMP ENGINEERING & TRADING SDN. BHD. ( 780731-H)
PRODUCT DATA SHEET
TRADE NAME : IMP BARITE
CHEMICAL NAME : BARIUM SULPHATE
SOLE DISTRIBUTOR : IMP ENGINEERING & TRADING SDN. BHD.
ADDRESS : NO: 3-2, JALAN SL1/11,
BANDAR SUNGAI LONG,
43200 CHERAS, SELANGOR, MALAYSIA
TELEPHONE NO : (006) 03 - 9010 4436.
FAX NO : (006) 03 - 9010 4439.
EMERGENCY NO :
Website : www.nuclearsolution.com.my
Email : johnlaw9999@gmail.com
IMP BARITE - Barium sulphate ( or Barium sulfate ) is the inorganic compound with the chemical formula BaSO4. It is a white crystalline solid that is odourless and insoluble in water. It occurs as the mineral barite, which is the main commercial source of barium and materials prepared from it. The white opaque appearance and its high density are exploited in its main applications. It is used principally as a
protection agent for Radiation Shielding in Medical Industry.

IMP BARITE is non-corrosive, non-toxic and flammable. IMP BARITE is a non-hazardous product.
PHYSICAL AND CHEMICAL PROPERTIES
Specific Density : 4.48g / cm3
Particles Sizes : 45 to 75 microns
Molar Mass : 233.43g / mol
Solubility : Insoluble in water (Low)
pH : 6.8 to 7.2 (slurry)
Melting Point : 1345簞C . Does not decompose by heat nor react with other
chemicals at room temperature.
Fire Hazard : Not flammable or Combustible
Colour : Pinkish white to reddish
Odour : Odourless
Packing : In 50kg paper sack, palletised into 2mt wooden pallets, wrapped
with polythene plastic cover and strapped.
References : Holliman, A.F.and Wiberg,E.(2001) Inorganic Chemistry, San Diego,
CA : Academic Press, ISBN 0-12-352651-5
HEALTH, SAFETY AND ENVIRONMENT (HSE) INFORMATION
PRECAUTIONARY LABELLING
HEALTH : 1 slight
FLAMMABILITY : 0 None
REACTIVITY : 0 None
CONTACT : 0 None

HAZARD RATING ARE 0 TO 4 (O = NO HAZARD ; 4 EXTREME HAZARD)

HANDLING PROCEDURE RECOMMENDATION

  • Wear suitable protective clothing and glove when handling the product.
  • Avoid inhalations of the product powder.
  • Avoid eye contact with the product powder.
  • Wear goggles or full-face shield to protect the eyes and nose.
  • Store the product in well-ventilated and dry area.
EFFECTS OF OVER EXPOSURE
INHALATION : Excessive inhalation of the product powder may cause irritation of the
respiratory system.
May cause amitosis if inhaled over prolonged period.
EYE CONTACT : Product may cause irritation to the eyes.
SKIN CONTACT : Product may cause temporary staining of the skin.
INGESTION : Product is inert but may be harmful if ingested in large quantity.
FIRST - AID PROCEDURES
INHALATION : Call a physician. If breathing is irregular. If breathing stopped, administer
artificial respiration immediately.
EYE CONTACT : Flush eyes with large amount of water immediately.
Call physician if irritation persists.
SKIN CONTACT : Immediately wash skin with soap and water
INGESTION : If swallowed and the person is conscious, immediately give large amount
of water and induce vomiting. Get a physician.

SPILL AND DISPOSAL

IN THE EVENT OF A SPILL OR DISCHARGE:-

  • Wear suitable protective clothing and glove.
  • Carefully sweep up and remove the spill.
  • Dispose the spill in accordance with all the applicable Federal, State and the Local Environmental
    Rules and Regulations.
 
Nuclear Solution (M) Sdn Bhd (855707-W)
No.3-2, Jalan SL 1/11, Bandar Sungai Long, 43200 Cheras, Selangor D.E. Malaysia
    Email: nuclearsolution123@gmail.com
© Coprright of Nuclear Solution (M) Sdn Bhd. 2010
All Right Reserved
Designed by :
NetBuilder